Misting Systems|Evaporative Cooling Systems|Dry Mist

0.3mm MTP-LP Nozzle Head

R 100.22

Micro Mist Starter, Extender Kits and Micro Mist Ultra Kits all use 0.3mm MTP-LP Nozzle Heads. These nozzles do not require a minimum pressure rating to operate and are ideal for low or medium pressure misting systems.

Nozzle heads are not classified as being non-drip. Small amount of dripping will occur when the systems are closed or switched off. Dripping should subside once the pressures in the spray lines are equal to atmospheric pressure.

0.3mm MTP-LP Nozzle head specifications:

Orifice size 0.3mm
Nozzle size 10mm x 9mm x 9mm
Nozzle weight 2g
Nozzle body 303 Stainless Steel
Nozzle O-ring NBR (Nitrile-butadiene Rubber)
Temperature range -26ºC – 120ºC
Thread 10/24
Flow rate 0.03 L/Min
Droplet spread rate Not available
Minimum pressure 2 Bar
Operating pressure 2 – 10 Bar
Maximum pressure 10 Bar
Closing pressure 0 Bar
Drip potential Likely
Packaging 4 x 0.3mm MTP-LP Nozzles heads per packet