Micro Mist Starter, Extender Kits and Micro Mist Ultra Kits all use 0.3mm MTP-LP Nozzle Heads. These nozzles do not require a minimum pressure rating to operate and are ideal for low or medium pressure misting systems.
Nozzle heads are not classified as being non-drip. Small amount of dripping will occur when the systems are closed or switched off. Dripping should subside once the pressures in the spray lines are equal to atmospheric pressure.
0.2mm Complete Low-Pressure Nozzle Specification:
|Nozzle size||10mm x 9mm x 9mm|
|Nozzle body||303 Stainless Steel|
|Nozzle O-ring||NBR (Nitrile-butadiene Rubber)|
|Temperature range||-26ºC – 120ºC|
|Flow rate||0.03 L/Min|
|Droplet spread rate||Not available|
|Minimum pressure||2 Bar|
|Operating pressure||2 – 10 Bar|
|Maximum pressure||10 Bar|
|Closing pressure||0 Bar|
|Packaging||1 x 0.2mm Complete Low-Pressure Nozzle