Magique Mist High Pressure Mist systems and kits all use a range of high pressure nozzles to deliver high quality, high volume dry mist. High pressure nozzles require a minimum pressure to open and operate. High pressure nozzles are classified as being non-drip as the nozzle will “close” immediately when the line pressure drop below the minimum opening pressure of the nozzle. Care should be taken to use these nozzles only in high pressure systems.
High pressure nozzles are easy to install and maintain. To clean these nozzles simply soak them overnight in a vinegar solution, rinse and then replace. Do not try to “open up” any blocked High pressure nozzles with sharp objects as this would permanently damage the nozzle and affect the misting pattern.
High pressure MTP nozzles are available in a wide range of sizes. Call us if you need help with deciding which is the best nozzle for you application.
Average droplet sizes are generally indicated as:
|Steam/Mist||1µm – 50µm|
|Fog||50µm – 100µm|
|Drizzle||100µm – 300µm|
|Light rain||300µm – 1000µm|
|Heavy rain||1000µm – 5000µm|
0.3 MTP-HP Nozzle specifications:
|Nozzle size||24mm x 9mm x 9mm|
|Nozzle body||303 Stainless Steel|
|Temperature range||-50ºC – 230ºC|
|Flow rate @ 42 Bar||0.080 L/Min|
|Flow rate @ 70 Bar||0.113 L/Min|
|Droplet size spread rate||1.6µm – 39.1µm|
|Minimum pressure||Higher than 22 Bar|
|Operating pressure||22 – 70 Bar|
|Maximum pressure||100 Bar|
|Closing pressure||Less than 22 Bar|
|Packaging||4 x 0.3mm MTP-HP Nozzles per packet|