Micro Mist Starter, Extender Kits and Micro Mist Ultra Kits all use Pushlock fittings for easy installation. You do not need any specialised tools to tighten or remove a Pushlock fitting.
All you need to do is insert the tubing into the required fitting, ensure that the fit is nice and snug and it is job done. The internal “collet” of the Pushlock fitting will further aid in creating a leak free seal with the pressure build in the tubing during operation. To remove, push back on the outer lock ring and remove the tubing from the fitting.
No hassle no fuss!!
Magique Mist stocks a wide range of different Pushlock fittings for use in low and medium pressure applications. Give us a call with your requirement and our trained staff will gladly assist you.
10mm Pushlock blanking plug specifications:
|Pushlock blanking plug size||57mm x 19mm x 19mm|
|Pushlock blanking plug weight||20g|
|Pushlock blanking plug body||Gaskets, Synthetic material ring, AISI 304 Stainless steel clamp|
|Pushlock blanking plug thread||Cylindrical BSP with O-ring, Silicone free NBR (Nitrile-butadiene Rubber)|
|Temperature range||-20ºC – 50ºC|
|Maximum pressure||10 Bar|
|Drip potential||Unlikely if fitted properly within pressure range|
|Packaging||1 x Push Lock Blanking Plug|